Product Test Results
Below we have included some of our test reports that have been completed based on different formulations of our GM2000 product. The GM2000 product that is currently available and used by our Goldmorr Master Technicians is specifically targeted for mould spores.
If you would like more information on clearance testing using the Goldmorr System, then please contact us at firstname.lastname@example.org
TEST 1 - DERMAL TOX TEST - ICP FIREFLY PTY LTD
The objective of this study was to evaluate the acute skin irritation/corrosion reactions of Decon Shield liquid (OECD Guidelines for the Testing of Chemicals, No. 404).
The test item, Decon Shield, was classified as non-irritant to skin according to the National Occupational Health and Safety Commission (NOHSC) Approved Criteria for Classifying Hazardous Substances [NOHSC: 1008 (1999)] under the conditions of this study.
TEST 2 - BIODEGRADABILITY TEST - CETEC PTY LTD
Decon Shield has rapid and excellent biodegradability.
"A maximum degradation achieved on average was 95% during the test period. Generally a substance with greater than 70% decomposition within 28 days is classified as having excellent biodegradability;"
TEST 3 - BOTULINUM TOXIN A TEST - NSW POLICE FORENSIC COUNTER TERRORISM AND DVI UNIT
DECON SHIELD is a new solution which offers a non- corrosive, nontoxic yet effective option for decontamination of bacterial and chemical substances. This experiment tested the effectiveness of this solution in inactivating Botulinum toxin A by applying the solution to 10ul of active toxin. The inactivation of the toxin was tested at the end of select contact times.
Results indicated that DECON SHIELD was successful in inactivating Botulinum toxin A after one minute contact time.
TEST 4 - C. DIFF TEST RESULTS - NORTHEAST LABORATORIES, INC.
C.Diff - 99.999% spore reduction in 30 seconds
PROCEDURE: AOAC 960.09 Germicidal and Detergent Sanitizing Action of Disinfectants, modified by use of Clostridium difficile ATCC and appropriate growth medias and environments
TEST 5 - MICROBIOLOGICAL EVALUATION - SIRIM TESTING SERVICE DEPARTMENT - MALAYSIA
Tests performed on our fabric-coating product, which can be used on many surfaces showed a minimum of 99.99% on tests performed on the below micro-organisms:
Pseudomonas aeruginosa - 99.99%
Escherichia Coli - >99.999%
Staphylococcus aureus - >99.999%
Independent clearance results from our Goldmorr Master Technicians out in the field.
Clearance Test 1
Retirement Village (Post remediation testing) Indoor Air Sample reading <6 / Outdoor Air Sample 40
Clearance Test 2
High School Boarding Facilities (Post remediation testing)
Clearance Test 3
Building located in Queensland (Post Remediation testing)
Clearance Test 4
Air Duct clean & Fog – Samples taken 5 days later ( Sample 1 - 7500 down to 87 / Sample 2 – 4000 down to 87
Field Test Results